Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

Verify the Assembly of the Robotic and Turret Parts of the 1:2 Mars 2020 Perseverance Rover Replica – 3D Printed Prototype

While our design team is finalizing the design details of the 1:2 Mars 2020 Perseverance Rover Replica, our building team has been verifying the designs using SLA 3D printing technology since 3 months ago.

We started the verification process from the robotic arm and the turret of the 1:2 Mars 2020 Perseverance Rover Replica. They are parts of the most complicated structures, the Sample Caching System (SCS), in the 1:2 Mars 2020 Perseverance Rover Replica.

The robotic arm (RA) of our 1:2 Mars 2020 Perseverance Rover Replica has a total of 5 joints and each joint has one electronic motor inside which allows the robotic arm to make movements exactly the same as that of the real Perseverance Mars Rover on the Red planet.

The SHERLOC (and WATSON) in our 1:2 Mars 2020 Perseverance Rover Replica has no scientific function but it is attached to the instrument turret via six vibration isolators arranged in three pairs which is the same way as that of the real Perseverance Mars Rover.

The PIXL in our 1:2 Mars 2020 Perseverance Rover Replica has no scientific function but it is attached to the instrument turret via six actuated struts (Electric actuator) arranged in three pairs which is the same way as that of the real Perseverance Mars Rover.

The Drill in our 1:2 Mars 2020 Perseverance Rover Replica can use exchangeable bits to drill on rock and collect ‘samples’ into the tube inside each bit. This assembly and its assistant structure are extremely complicated. We will need to do a lot of tests and changes of design to push the techniques to an affordable and available limit so as to make this part work as similar to that of the real Perseverance Mars Rover as possible.

The following photo shows the 3D-printed parts of the robotic arm and turret. Some parts are assembled and then dissembled so as to help the design team to optimize the design. The new design will be 3D-printed and assembled with the ‘correct’ parts. Although we have done simulations in the design software, sometimes, a large part of the design is still proven totally wrong after we assemble parts in the physical world and therefore we have to roll back to the beginning and redesign everything. This kind of iteration happened a lot in the process of building our 1:2 Mars 2020 Perseverance Rover Replica, let alone that of the real Perseverance Rover now on Mars.

SLA printed robotic arm and turret of our 1:2 Mars 2020 Perseverance Rover Replica
Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

The MMRTG of the 1:2 Mars 2020 Perseverance Rover Replica

In the rear of the Perseverance Mars Rover, as its predecessor the Curiosity Mars Rover, there is a very eye-catching big ‘package’ slanted. This part called a “Multi-Mission Radioisotope Thermoelectric Generator” (MMRTG), powers the Perseverance Mars Rover by converting heat from the natural radioactive decay of Plutonium into electricity. The MMRTG also charges two lithium-ion rechargeable batteries to meet peak demands of the Perseverance Mars Rover’s activities when the demand temporarily exceeds the MMRTG’s steady electrical output levels. Furthermore, MMRTG also provides heat to keep the scientific instruments in the Perseverance Mars Rover’s body at their correct working temperature.

The MMRTG of our 1:2 Mars 2020 Perseverance Rover Replica has the exact visual presentation of the real Perseverance Mars Rover on the Red Planet. But please rest assured that there is any radioisotope inside the MMRTG of our 1:2 Mars 2020 Perseverance Rover Replica. Our 1:2 Mars 2020 Perseverance Rover Replica is powered by a set of rechargeable batteries.

The MMRTG of our 1:2 Mars 2020 Perseverance Rover Replica front view
The MMRTG of our 1:2 Mars 2020 Perseverance Rover Replica back view
The MMRTG of our 1:2 Mars 2020 Perseverance Rover Replica top view
Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

The Mast of the 1:2 Mars 2020 Perseverance Rover Replica

The remote sensing mast and the camera system on its top are like the neck and head of the Perseverance Mars Rover. This part is one of the two most iconic visual identities of the Mars 2020 Perseverance Rover. The other one is its legs and wheels, of course. So when you see them, you will immediately realize that you are seeing a recent Mars Rover. However, since the Perseverance Mars Rover is designed based on the Mars Science Laboratory’s Curiosity rover configuration (the Curiosity Mars Rover), it’s difficult to distinguish them with a quick glance at just their masts.

The mast of the Perseverance Mars Rover has a motor in its bottom used to raise it from horizontal status to vertical after the rover landed on Mars so as to elevate the cameras to the highest position of the Perseverance Mars Rover. After the mast is raised, a 2 DoFs (dimensions of freedom) motor set can rotate the top camera box which hosts all the cameras horizontally and vertically.

The mast on our 1:2 Mars 2020 Perseverance Rover Replica has exactly the same motorized structure as that on the real Perseverance Mars Rover now on the Red Planet. It can raise the mast to vertical status and allow the camera box to change its orientation horizontally and vertically.

We completed the design of the mast on our 1:2 Mars 2020 Perseverance Rover Replica a few months ago but I was too busy to post its progress because we were busy building its 3D printed prototype to test the design of all its parts.

Here are two photos of the mast’s horizontal status and vertical status of our 1:2 Mars 2020 Perseverance Rover Replica.

Mast’s horizontal status of 1:2 Mars 2020 Perseverance Rover Replica
Mast’s vertical status of 1:2 Mars 2020 Perseverance Rover Replica
Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

“Differential-Rocker-Bogie” – The Suspension System of the 1:2 Mars Rover 2020 Perseverance Replica’s Design is completed

The suspension system of the Mars 2020 Perseverance Rover is one of its most interesting structures. It uses mechanical leverage to spread the weight of the rover to each of the Perseverance Rover’s wheels relatively equally. This ingenious structure also minimizes the tilt of the Perseverance Rover when it drives over uneven terrain.
Among the three components, 

“Differential-Rocker-Bogie”, of the Mars 2020 Perseverance Rover’s suspension system, the most strategic one is the differential. Without it, the weight cannot pass to the other side forcefully. Therefore, in some situations, the three wheels on one side have to bear a major proportion of the weight of the Mars 2020 Perseverance Rover. While with the “Differential”, the burden is shared on both sides forcefully.

While the connections of all the joints of the “Differential-Rocker-Bogie”  suspension system are purely mechanical, the steering of the two front wheels and two rear wheels are realized by motors. This arrangement allows the Mars 2020 Perseverance Rover to turn a full 360 degrees in place. Also, there is a driving motor for each of the six wheels at the terminals of the suspension structure. 

Since we are building our 1:2 Mars Perseverance Rover Replica as a moveable and motorized replica, all the mechanical structures of the suspension system must be made exactly the same as the real Mars rover. And meanwhile, the structure must be strong enough to withstand the weight of the Mars Rover Perseverance replica. The steering motors and driving motors of our 1:2 Mars Perseverance Rover replica allows it to steer and drive exactly the same as the real Mars 2020 Perseverance Rover.

Mars 2020 Perseverance Rover Replica Rocker Bogie leg 1
Mars 2020 Perseverance Rover Replica Rocker Bogie leg 1
Mars 2020 Perseverance Rover Replica Rocker Bogie leg 2
Mars 2020 Perseverance Rover Replica Rocker Bogie leg 2
Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

The Robotic Arm of the 1:2 Mars Rover 2020 Perseverance Replica’s Design is completed

The robotic arm and the turret at its front end is one of the most complicated components in the Mars Rover 2020 Perseverance.

It requires five motors to realize its five degrees of freedom.

In the real Perseverance Rover, the turret is like a hand that carries cameras, analyzers for on-site studying and sample catching. The scientific tools mounted on the turret are SHERLOC and WATSON and PIXL.

In our 1:2 Mars Rover 2020 Perseverance Replica, all the parts are rebuilt in a ultra-detailed way.

The following 7 screenshots are from the 3D model we are building. The next step is to use advanced techniques to build them in the physical world. Stay tuned!

Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 1
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 1
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 2
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 2
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 3
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 3
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 4
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 4
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 5
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 5
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 6
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 6
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 7
Mars Rover 2020 Perseverance Replica Robotic Arm Turret Drill 7
Categories
1:2 Perseverance Mars Rover Replica Design and Building Diary

The 1:2 Perseverance Mars Rover Motorized Replica Project is On Going

We put the 1:2 Perseverance Mars Rover Motorized Replica project on hold for a few months but now we are back to continue the project.

The recent progress is smooth and fast. We will post photos and videos for the 1:2 Perseverance Mars Rover Motorized Replica very soon.
We won’t define the 1:2 Perseverance Mars Rover Motorized Replica a super-high end toy, but an ultra-realistic ultra-detailed masterpiece for super collectors.

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover Getting Started for Science Campaign

After 4 month-preparation, on June 1st, the Mars 2020 Perseverance Rover started to leave the landing site and to get ready for its science campaign – to collect rock samples. The goal is to have 43 samples after this campaign is completed.

We are building a 1:2 Peseverance Mars Rover Replica, which will perfectly replicate the appearance structure of the real Mars 2020 Perseverance Rover in very fine details, but with no scientific functions, so you will also find 43 sample tube replicas inside the Perseverance Mars Rover Replica.

Before June 1st, the Mars 2020 Perseverance Rover had tested MOXIE, taken over 75k photos, supported Ingenuity’s flight tests on top of completing all its systems’ health checks. For our Perseverance Mars Rover Replica, you will also be able to take photos and videos. There will also be a small screen on the Mars Rover Replica for you to see if everything is connected well and operates normally.

In the next few months, the Mars 2020 Perseverance Rover will be exploring an area of 4 km^2 – the first collecting site, and it will have traveled for 2.5 to 5 km of distance. The reason to choose this location is that it was under over 100 meters of water 3.8 billion years ago, and by studying the rocks here, we will learn so much about Mars.

With our Mars Rover Replica, you can simulate most of the moves that the real Mars 2020 Perseverance Rover does although with no real scientific functions. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover’s InSight Lander Countertuitive Way to Conserve Power

As the Mars 2020 Perseverance Rover, the Ingenuity Helicopter, and the InSight Lander have been on Mars for over 3 months, more and more dust had been accumulated on the InSight lander’s solar panels. The dust has negative effects on power conservation and it resulted in the InSight lander losing about 30 watt-our energy daily on Mars.

We are building a 1:2 Peseverance Mars Rover Replica, which will perfectly replicate the appearance structure of the real Mars 2020 Perseverance Rover in very fine details, but with no scientific functions. Building the InSight lander is also under our consideration. It can be a nice decoration closet for the Perseverance Mars Rover Replica.

The team came up with an innovative and counterintuitive way to remove the dust. Instead of installing another motor or utilize Ingenuity Helicopter’s blazes, in which both methods require too much power than we want to, to shake off the dust, a small scoop is used to trickle sands near the solar panel, and then the large sand grains will carry the small dust away when the wind blows. That is to say, when to scoop sand also needs to be carefully planned. After the dust’s removal, it has been decided that the InSight lander will go dormant later this Summer to save energy until August.

It can be speculated that dust could also accumulate on the Mars 2020 Perseverance Rover and the Ingenuity Helicopter, but since they move more than the InSight lander, the dust so far is not an yet. For our Perseverance Mars Rover Replica, if you drive it outside, dust is not an expected problem since the battery will be inside the body.

Around October 7th, Mars and Earth will rotate to the opposite sides of the Sun, and this will have significant effects on the communications between the Mars 2020 Perseverance Rover and Earth. So during that period, even though the Mars 2020 Perseverance Rover will keep on recording data and send the data back to Earth, Earth will not give any commands to the rover. Essentially, most of the operation will pause till the end of October.

For our Perseverance Mars Rover Replica, you won’t need to worry about downtime, since it will be operating on batteries or outlets. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover’s Ingenuity Helicopter Photos Stitched into 3D Video

Since the first flight, there are have been many photos of the Mars 2020 Perseverance Rover’s Ingenuity Helicopter since the Mars 2020 Perseverance Rover landed on Mars. The photos from the third flight which happened on the 25th of April were stitched into a video. The photos were taken by the two MastCam-z cameras on the Mars 2020 Perseverance Rover’s mast. When you watch the video, you will feel like you are standing right by the Mars 2020 Perseverance Rover’s Ingenuity Helicopter and you are seeing it taking off and flying back.

We are currently building a 1:2 Perseverance Mars Rover Replica, which perfectly replicates the appearance structure of the real Mars 2020 Perseverance Rover. We also have a plan to build a replica of the Mars 2020 Perseverance Rover’s Ingenuity Helicopter.

In the video, you can see the Mars 2020 Perseverance Rover’s Ingenuity Helicopter, first of all, flew up for 16 feet  (5 meters), flew away for 164 feet (50 meters), and then flew back to the original takeoff spot. For our Mars 2020 Perseverance Rover Replica’s Ingenuity Helicopter Replica, you can navigate it with remote control.

The Mars 2020 Perseverance Rover’s Ingenuity Helicopter work independently from the Mars 2020 Perseverance Rover. Their missions don’t overlap. The main purpose of the Mars 2020 Perseverance Rover’s Ingenuity Helicopter in this mission is first to show that it is possible to control rotorcrafts while exploring Mars, and what meaningful outcomes this can bring for future missions.

Although our 1:2 Rover Replica is smaller and does not have the functions that the real Mars 2020 Perseverance Rover has, it will be ultra-detailed and realistic. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover’s Robotic Arm Starts Missions

The science instruments WASTON on the Mars 2020 Perseverance Rover’s Robotic Arm have worked together with MasterCam-Z and SuperCam to learn more about Martian rocks. From the information provided by these cameras, scientists can learn if there was ever life or how the rocks were formed. We are currently building a 1:2 Perseverance Mars Rover Replica, which perfectly replicates the appearance structure of the real Mars 2020 Perseverance Rover, including the Robotic Arm, WASTON, MasterCam-Z, and Super Cam. Users can remotely control the Perseverance Mars Rover Replica to simulate the real Mars 2020 Perseverance Rover’s operation.

The Mars 2020 Perseverance Rover’s Robotic Arm plays a very important role when it comes to studying rocks. In order to remove new dust from the surface and expose the inside of the rocks, the Mars 2020 Perseverance Rover’s Robotic Arm needs to move close to the spot of interest and then control its abrading corer to scrape off the surface. Once that’s done, the scientists will decide if that is a valuable site by carefully studying the images transmitted by PIXL and SHERLOC. The Mars 2020 Perseverance Rover’s Robotic Arm has not started to drill corers yet because scientists are still deciding which rocks are worthy candidates. The PIXL and SHERLOC will also be perfectly replicated on our Perseverance Mars Rover Replica.

Studying the rocks is how we can learn about Mars. Therefore, the more types of rocks the Mars 2020 Perseverance Rover discovers, the better we get to know about Mars, and the more we will be ready for human exploration on Mars. Our Perseverance Mars Rover Replica will also have the sample tubes replica, and users can put rocks, sands, or dirt into them. Not only can it be an ultra-realistic collection, but also a great teaching tool. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].