Categories
Mars 2020 Perseverance Rover News

10,932,295 Names on the Mars 2020 Perseverance Rover

Before the Mars 2020 Perseverance Rover gets ready to travel to Mars, 10,932,295 names from all over the world were submitted and laser-etched onto 3 tiny chips, and these 3 fingernail size ships were installed on the Mars 2020 Perseverance Rover‘s aft crossbeam. The names are not saved as files in the chips electronically but stenciled by electron beams physically. Carried by the Mars 2020 Perseverance Rover on Mars, it is like these 10,932,295 people are exploring Mars alongside the Mars 2020 Perseverance Rover.

We are building a 1:2 Peseverance Mars Rover Replica, which will perfectly replicate the appearance structure of the real Mars 2020 Perseverance Rover down to very fine details. Therefore, we will also have the name chips on the crossbeam on the Perseverance Mars Rover Replica. However, instead of having almost one million names on it like the real Mars 2020 Perseverance Rover, the users can write whatever they want. We can do it before sending out the Rover Replica, or the users can do it themselves with some necessary tools.

The name chips can be seen from cameras on the Mars 2020 Perseverance Rover‘s mast. You can see them sitting together in a row and fixed by a cover and two big screws on the crossbeam. For our Perseverance Mars Rover Replica, the user can easily unscrew the chips, write whatever they want on them, and then put them back. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover Sends Back Video and Audio of Landing

The two NavCams on the Mars 2020 Perseverance Rover‘s mast capture the entire process of landing and this video has been sent back to Earth. For our 1:2 Perseverance Mars Rover Replica, there will also be two NacCam replicas, and not only will the appearance structure be the same, but we also are planning on making the cameras real.

In the video, at first, the parachute deploys and inflates, in order to slow down the descending speed to make sure a safe landing. Then you will see the heat shield gets separated from the bottom of the Mars 2020 Perseverance Rover. Since the Mars 2020 Perseverance Rover is decelerating due to the parachute, the heat shield flies much fast and hits the Martian land first. As the Mars 2020 Perseverance Rover descents, the Lander Vision System is processing images and data rapidly to narrow down the area where the rover should land. Next, the back shell is also detached from the Mars 2020 Perseverance Rover – this is not showing from the footage but confirmed in another way. After the landing location is decided and the sky crane maneuver is conducted, you can see from the video, which is taking by the camera at the bottom of the Mars 2020 Perseverance Rover, that red dust and rocks get blown away by the engine. Finally, when the Mars 2020 Perseverance Rover touches down, you can see the descent stage is severed and flies away, leaving the Mars 2020 Perseverance Rover safely parking on the Martian land.

Other than this complete and real footage of the Mars 2020 Perseverance Rover‘s landing, there is also an audio recording after the rover landed, which is the sound of Mars. This is the first time a Mars Rover ever brought a microphone on Mars and survived the EDL process. Apparently, the audio is dominated by the Mars 2020 Perseverance Rover‘s motors (noise), but after filtering out the noise, you can hear the Martian wind. It is great we can hear the sound of the Mars 2020 Perseverance Rover – unlike cars on Earth, Mars 2020 Perseverance Rover operates with electricity, therefore does not have a sound of a diesel engine. We will also replicate the sound of the Mars 2020 Perseverance Rover. If the motors of the Mars Rover Replica cannot make the same sound as the Mars 2020 Perseverance Rover‘s motors, we will make the same sound effects for the Mars Rover Replica so they will sound the same. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover’s Video of Landing

On the 22nd of February, 2021, there is a conference meeting hosted at 2 pm EST online on multiple social media platforms. A video that shows the moment when the Mars 2020 Perseverance Rover touches down on Mars will be revealed for the first time. This is the first-ever high-resolution color video sent from a rover on Mars, and it was taken by a camera under the decent stage. Photos of Mars, which was taken by the Mars 2020 Perseverance Rover will also be shown at the conference. 

We are building a 1:2 Perseverance Mars Rover Replica which will perfectly replicate the appearance structure of the real MMars 2020 Perseverance Rover. Users can simulate what Mars 2020 Perseverance Rover can do with the Perseverance Mars Rover Replica. We also have plans to make the descent stage above the Mars 2020 Perseverance Rover Replica, similar to having a nice decoration closet for display.

If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover’s Ingenuity Helicopter reports to Earth

On the 20th of Feburary 2021 at 3:30 pm PST, Mars 2020 Perseverance Rover’s Ingenuity Helicopter sent its first report back to Earth via the Mars Reconnaissance Orbiter. In the report, scientists learned that both the Mars 2020 Perseverance Rover’s Ingenuity Helicopter and its charging station are operational.

The Mars 2020 Perseverance Rover’s Ingenuity Helicopter is scheduled to stay attached at the bottom of the Mars 2020 Perseverance Rover for at least one month. The pupose is to charge the Ingenuity Helicopter slowly until its full capacity with the Mars 2020 Perseverance Rover‘s nuclear power MMRTG. Then after the Mars 2020 Perseverance Rover’s Ingenuity Helicopter is dettached and starts its missions, it will have to charge itself with solar power. Our 1:2 Peseverance Mars Rover Replica will also the helicopter shileld at the bottom of the Peseverance Mars Rover Replica and the charging station. Since we are already planning on building the Mars 2020 Perseverance Rover’s Ingenuity Helicopter Replica, it is only reasonable that we make the charging station a real charger, so that the Ingenuity Helicopter Replica can recharge with the Perseverance Rrover Replica.

The use of the Mars 2020 Perseverance Rover’s Ingenuity Helicopter provides the mission another dimension to study Mars. The Mars 2020 Perseverance Rover’s Ingenuity Helicopter not only can take photos from much higher altitudes compared to just the Mars 2020 Perseverance Rover itself, but also it can get to and explore areas that the Mars 2020 Perseverance Rover cannot reach. Our 1:2 Peseverance Mars Rover Replica‘s Ingenuity Helicopter Replica will also be equipped with a camera.

There are other helicopters that were sent into space in the past, but the success of the Mars 2020 Perseverance Rover’s Ingenuity Helicopter will bring the future missions to another level. In this Mars 2020 mission, the Mars 2020 Perseverance Rover’s Ingenuity Helicopter is working independly from the Mars 2020 Perseverance Rover because scientis were not sure how it will react, but now, they can start to plan missions that can only be completed by rotorcrafts.

Our 1:2 Perseverance Mars Rover Replica will be a perfect replica of the Mars 2020 Perseverance Rover. Although the rover replica will not have the actual functions as the real Mars 2020 Perseverance Rover, the appearance structure will be the same. If you are interested in our 1:2 Perseverance Mars Rover Replica, you may check out [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover gets prepared for operations and sends back video of Mars

After landing on the 18th of 2021, the Mars 2020 Perseverance Rover ran an initial diagnosis and let Earth know its health condition the next day on the 19th of 2021. After checking everything is working normally, the Mars 2020 Perseverance Rover can prepare for the deployment of the Mast in around 2 days, which is originally lying on top of the rover.

We are building a 1:2 Perseverance Mars Rover Replica which will perfectly replicate the appearance of the real Mars 2020 Perseverance Rover. Users can simulate the Mars 2020 Perseverance Rover‘s mast deployment process with our Mars Rover Replica.

In the next few days, the Mars 2020 Perseverance Rover is expected to do its first test drive on the Martian land and test its robotic arm. Our 1:2 Perseverance Mars Rover Replica‘s robotic arm will be a perfect replica of the Mars 2020 Perseverance Rover‘s robotic arm and will have the same movability.

The science instruments are scheduled to complete health checkups in a few weeks, while the Mars 2020 Perseverance Rover’s Ingenuity Helicopter is expected to complete the checkup and prepare for flying in one or two months.

While descending and landing, the Mars 2020 Perseverance Rover took a video that shows color footage of its touchdown, but it was still being sent and processed as we speak at this moment. This is beyond excitement – the past rovers mainly sent black and white photos, but the Mars 2020 Perseverance Rover is able to send back color videos and photos.

Parking on the sands on Mars, the two Hazcams under the Mars 2020 Perseverance Rover took a photo of one wheel sinking in the Martian dirt. Our Rover Replica also has numerous cameras so that users can see from its point of view. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].

Categories
Mars 2020 Perseverance Rover News

Mars 2020 Perseverance Rover lands on Mars successfully

On February 18th, 2021 at 12:55 pm PST Earth time, the Mars 2020 Perseverance Rover touched down on Mars safely after traveling in space for 201 days for a distance of 472 million kilometers (293 million miles).

The Mars 2020 Perseverance Rover‘s entry, descent, and landing process were rather successful. After the touchdown, the Mars 2020 Perseverance Rover deploys its relevant components such as the wheels, and then the system will run some tests to make sure everything is good for operation. This process will take a few days or even more than 10 days to complete.

Compared with previous missions, Mars 2020 Perseverance Rover is more autonomous so that it will explore more areas on Mars. The Mars 2020 Perseverance Rover is not only studying the Martian terrain and collecting samples, but it will also send back valuable information so that scientists can tell whether or not human exploration on Mars is possible.

We are building a 1:2 Perseverance Mars Rover Replica which will perfectly replicate the appearance of the real Mars 2020 Perseverance Rover Users can simulate what Mars 2020 Perseverance Rover can do with the Perseverance Mars Rover Replica. If you are interested in our Mars Rover Replica, please check [1:2 Perseverance Mars Rover Replica Design and Building Diary].